Title: Technical Drawings & 3D Renderings for 3 Wooden Cabin Models (12m², 18m², 24m²) ⸻ Project Description I need a professional to create complete technical drawings and 3D renderings for three small wooden cabin models that my company will produce for export. Cabin Models: 1. 12 m² — 2.4 m x 5.0 m (must respect transport limits) 2. 18 m² — 3.0 m x 6.0 m (flat-pack design) 3. 24 m² — 4.0 m x 6.0 m (flat-pack design) ⸻ Transport Requirements These MUST be respected: For 12 m² model (assembled transport): • Max transport width: 2.40 m • Max transport height: 2.70 m (from ground to roof peak) • Wall height should be ≈ 2.20 m • Roof depth/peak ≈ 0.30 m - 0.35 m • Cabin must be safe to transport fully assembled. For 18 m² & 24 m² models: • These will be flat-pack, NOT assembled. • All components (walls, roof, floor panels) must fit palletized transport. • Designer must optimize panels for efficient packing. ⸻ Construction Style • Traditional wooden cabin style (clean lines, simple gable roof) • Open-plan interior (no separate rooms) • Foundation: wooden piers / small blocks (no slab) ⸻ Required Deliverables (Very Important) 1️⃣ 2D Technical Drawings for Each Model Must include: • Floor plan with all measurements • Front, side, and rear elevations • Roof plan • Cross-sections • Frame/structural drawings (studs, beams, floor framing, roof framing) Format: PDF + DWG (AutoCAD) ⸻ 2️⃣ Material List + Cut List For each cabin: • Full material list • Quantities • Thickness of plywood/OSB/panels • Beam sizes (e.g., 45x95 mm or 50x100 mm) • Roofing material • Fasteners, screws, brackets • Floor structure materials • Insulation (if included) Materials must be cost-efficient and widely available in Turkey / Balkans. ⸻ 3️⃣ Assembly Instructions Simple, clear instructions showing: • Step-by-step assembly • Frame construction • Panel installation • Roof mounting • Final finishing Format: PDF ⸻ 4️⃣ 3D Models & Renderings For each model provide: • Full 3D model • Exterior render (daylight) • Interior open-plan render • Cutaway 3D showing structure Format: PNG/JPG + original 3D file ⸻ 5️⃣ Flat-Pack Layout (Only for 18m² & 24m²) • How panels should be cut • How they stack on pallets • Max dimensions for shipping • Number of pallets required ⸻ Design Priorities The design must focus on: • Low production cost • Fast assembly for workers • Transport efficiency • Strong structure for export • Simple, clean, professional look ⸻ What I will provide • Reference images • Style examples • Any extra information needed ⸻ Project Goal Create export-ready, professional, low-cost wooden cabin models that can be used for a sales catalog, mass production, and B2B export marketing.