NUCLEAR-AGE NIGHTSTAND: HIGH-PRECISION CNC READY 2D AND 3D FILES !!! MANDATORY: READ BEFORE BIDDING !!! You must thoroughly read all instructions and review attached files before bidding. Your bid is a FIXED price for all requirements: accurate 2D DXF and 3D STL/STEP files for every part, precisely matching all dimensions, features, and complex joinery. No additional payment will be approved for scope misunderstanding. By bidding, you agree to complete all tasks for your submitted price. REVIEW ATTACHED PDF: "Nuclear-Age Nightstand." REVIEW THE FULL PART LIST BELOW. In your proposal, you MUST include this exact phrase: "I will provide 3D Rotary and 2D files for the 7-degree angled legs and drawer box." If this phrase is missing, your bid will be ignored. 1. SCOPE OF WORK Convert every wooden component in the attached PDF into individual, CNC-ready files. CRITICAL (PART A - LEGS): These legs have a 7-degree splay. I require TWO types of files for the legs: 3D ROTARY: A full 3D model (STEP/STL) for 4-axis machining of the tapers and angled mortises. 2D VECTORS: Flat 2D DXF/CRV files for indexed 3-axis machining. 2. REQUIRED DELIVERABLES (PER PART) 3D FILES: .STL (High resolution) AND .STEP. 2D FILES: .CRV (Vectric VCarve) or .DXF (Clean, closed vectors). ASSEMBLY: One master .STL or .STEP file showing the cabinet, drawer, and legs fitted together. 3. JOINERY & TECHNICAL STANDARDS (STRICT PRECISION) 7-DEGREE ANGLED JOINERY: All mortise and tenon joints for the leg/base assembly must maintain the 7-degree compound angle specified in the PDF. Mortises must be angled into the legs. DOG-BONE FILLETS: Add dog-bone fillets to all INTERNAL corners of all mortises, rabbets, and drawer dadoes. Use a radius for a 1/8" (0.125") bit. ASSEMBLY CLEARANCE: Apply a 0.01" (0.25mm) offset to all tenons and drawer box parts to ensure a proper mechanical fit. ROTARY ALIGNMENT: Part A (Legs) must be centered for a 4th-axis rotary indexer to capture the 4-sided taper. DRAWER CONSTRUCTION: Model the drawer front with its specific overlay dimensions and include a 1/16" gap between the drawer box and cabinet interior. 4. FULL PARTS LIST (SCALE 1:1 - INCHES) [THE CABINET] TOP/BOTTOM (2): 3/4" x 14" x 18" (Includes 1/4" x 1/4" rabbets for back). SIDES (2): 3/4" x 12" x 14" (Includes 1/4" x 3/8" dadoes). BACK PANEL (1): 1/4" x 11-1/4" x 17-1/4". [THE BASE & LEGS] ANGLED LEGS (4): 1-1/2" x 1-1/2" x 10" (7-degree compound angles). BASE RAILS (2): 3/4" x 1-1/2" x 12-1/2" (Includes 7-degree angled tenons). BASE STRETCHERS (2): 3/4" x 1-1/2" x 14-1/2" (Includes 7-degree angled tenons). [THE DRAWER] DRAWER FRONT (1): 3/4" x 5" x 16-1/2". DRAWER SIDES (2): 1/2" x 4-1/2" x 12". DRAWER BACK (1): 1/2" x 4-1/2" x 15-1/2". DRAWER BOTTOM (1): 1/4" x 11-3/4" x 15-1/2".