PROJECT: HIGH-PRECISION 3D AND 2D MODELING FOR CNC (MISSION NESTING TABLES - SET OF 3) !!! MANDATORY: READ BEFORE BIDDING !!! You must thoroughly read all instructions and review attached PDF plan before bidding. Your bid is a FIXED price for all requirements: accurate 2D DXF and 3D STL/STEP files for every part, precisely matching all dimensions, features, and complex joinery. No additional payment will be approved for scope misunderstanding. By bidding, you agree to complete all tasks for your submitted price. REVIEW ATTACHED PDF: "Mission Nesting Tables." REVIEW THE FULL PART LIST BELOW (3 TABLES TOTAL) In your proposal, you MUST include this exact phrase: "I will provide 3D Rotary and 2D files for all three table sizes." If this phrase is missing, your bid will be ignored. 1. SCOPE OF WORK Convert every wooden component for all three tables (Large, Medium, Small) into individual, CNC-ready files. CRITICAL (PART A - LEGS): I require TWO types of files for all legs: 3D ROTARY: A full 3D model (STEP/STL) for 4-axis machining of the mortises and leg profiles. 2D VECTORS: Flat 2D DXF/CRV files for indexed 3-axis machining. 2. REQUIRED DELIVERABLES (PER TABLE SIZE) 3D FILES: .STL (High resolution) AND .STEP. 2D FILES: .CRV (Vectric VCarve) or .DXF (Clean, closed vectors). ASSEMBLY: One master .STL or .STEP file for EACH table to verify joinery fit. 3. JOINERY & TECHNICAL STANDARDS (STRICT PRECISION) MORTISE & TENON: All joints must be modeled to the exact 1" depths per the PDF. DOG-BONE FILLETS: Add dog-bone fillets to all INTERNAL corners of all mortises (Part A). Use a radius for a 1/8" (0.125") bit. ASSEMBLY CLEARANCE: Apply a 0.01" (0.25mm) offset to all tenons for a proper glue fit. ROTARY ALIGNMENT: All Legs (Part A) must be centered for a 4th-axis rotary indexer in the 3D export. HARDWARE POCKETS: Model the 5/8" diameter counterbore holes (1/8" deep) on the inside of aprons for the tabletop fasteners. 4. FULL PARTS LIST (SCALE 1:1 - INCHES) [TABLE 1: LARGE] LEGS (4): 1-1/2" x 1-1/2" x 24" SIDE APRONS (2): 3/4" x 2-1/2" x 14" (Includes 1" Tenons) FRONT/BACK APRONS (2): 3/4" x 2-1/2" x 20" (Includes 1" Tenons) TOP (1): 3/4" x 18" x 24" [TABLE 2: MEDIUM] LEGS (4): 1-1/2" x 1-1/2" x 22-1/2" SIDE APRONS (2): 3/4" x 2-1/2" x 11-1/2" (Includes 1" Tenons) FRONT/BACK APRONS (2): 3/4" x 2-1/2" x 15" (Includes 1" Tenons) TOP (1): 3/4" x 15-1/2" x 19" [TABLE 3: SMALL] LEGS (4): 1-1/2" x 1-1/2" x 21" SIDE APRONS (2): 3/4" x 2-1/2" x 9" (Includes 1" Tenons) FRONT/BACK APRONS (2): 3/4" x 2-1/2" x 10" (Includes 1" Tenons) TOP (1): 3/4" x 13" x 14"