I need a 3D model created from my logo image to make a keychain for 3D printing. The final model should look similar to the attached example image (raised logo on a solid base with a keyring hole). Requirements: • Convert my logo PNG into a 3D printable STL file • Add a solid base layer behind the logo • The logo should be raised above the base • Add a keychain loop with hole for a keyring • Everything must be one solid printable object • Must be optimized for FDM 3D printing Color / layer setup: • The bottom/base layer should print in black • The top raised logo should print in grey • Design the model so it is ready to import into Bambu Studio for two-color printing • Base layer thickness can be increased if needed for strength Specifications: • Width: about 70 mm • Base thickness: 2–3 mm (can increase if needed) • Raised logo height: ~1 mm • Keyring hole: 5 mm Important: • Do not change the logo design • Just convert it into a clean 3D printable keychain model Deliverables: • STL file ready for 3D printing • Optional: STEP or source CAD file Included Ai how i am envisioning it along with logo