I have a sheet-metal part that has to be built, validated, and reported entirely inside CATIA V5. I have the basic geometry sketched out, but I need an expert who can turn it into a clean, fully-parametric Sheet Metal Part, set up the right material properties, thickness parameters, bend tables, and reliefs, and then run the required simulation and analysis on the model to confirm it meets strength and deformation limits before manufacturing. Here is what I expect from you: • Re-create or refine the sheet-metal part in CATIA V5 Sheet Metal workbench, keeping design intent intact and all parameters editable. • Prepare an analysis set-up in the Generative Structural Analysis (or relevant) workbench: apply loads and boundary conditions that I will provide, mesh the part appropriately, and run the simulation. • Generate clear results plots—displacement, Von Mises stress, safety factor—and a short written summary highlighting whether the design passes or fails the criteria we set. • Supply the native CATPart/CATAnalysis files along with a brief PDF report so I can review and archive everything smoothly. I will share the load cases, allowable limits, and any company templates once we start. Let me know how soon you can begin, which CATIA V5 release you are running, and a rough estimate of the time you’ll need to complete both the sheet-metal model and the analysis.