I have a part that will be printed on a Bambu Lab machine and I need a ready-to-go .3mf file that slices cleanly and prints reliably in PLA. The finished piece must sit in the medium size range—somewhere between 10 cm and 30 cm on its longest side—so please choose layer heights, infill, supports, and any adaptive settings with that envelope in mind. You are free to optimize within Bambu Studio’s tool-set, but the final file has to open with no errors, pass the built-in analysis, and be fully configured for PLA (standard 0.4 mm nozzle). If you feel multiple profiles will help, include them inside the same project file. I have a base file you can work off of, but I need it tweaked for a specific buyer which has requirements of 34.90mm coin and 6.51mm width. Box would need to fit 5 coins each and have a slot for each coin for retention. I would like to keep the file under NDA or have ownership of it but this can be discussed prior to moving forward. Deliverables • One Bambu Studio .3mf containing all print settings • A brief note (plain text) explaining the key parameters you chose and any orientation or bed prep instructions Once I drop the file onto the printer, I expect it to build successfully without further tweaks. Let me know if you need additional details on geometry and I’ll supply them straight away.