I need my existing 2D logo converted into a clean, accurate 3D model suitable for 3D printing. I am currently learning Fusion 360, so the project must be created in Fusion 360 and the editable source file (.f3d) must be provided so I can review and modify it later. Design Specifications: • Overall size: Approximately 3.5 inches tall and 3.5 inches wide (open to proportional suggestions if needed to improve print quality while maintaining the same overall look and perception). • The white area of the design should serve as the bottom base layer. • The black outer border should be approximately 4 mm thick ( upward from the base). • The black, red, black, and grey elements inside the design should be raised approximately 3 mm above the white base. • All raised elements should be cleanly separated for multi-color 3D printing. Important Geometry Correction: In my current drawing, the corners appear visually wider than the sides, especially where the red and blue sections meet the corners. This is incorrect. The outer shape must be mathematically even and symmetrical on all sides. The proportions should be corrected so that all sides are consistent and geometrically accurate. Deliverables: • Fusion 360 editable file (.f3d) • STEP file (.step) • STL file ready for 3D printing • Clean, parametric model with organized components/bodies Other Notes: Please ensure the model is optimized for 3D printing with clean edges and proper wall thickness. If you have suggestions to improve strength, printability, or visual clarity at this size, I am open to recommendations as long as the final result maintains the same overall look and feel of the logo. Please let me know if you have any questions before starting.